Needle roller bearings have a relatively small diameter cylindrical movable element, the length of which is much larger than their diameter. Compared to other types of roller bearings, needle roller bearings have a small cross-sectional height and a significant load-bearing capacity as well as rigidity in relation to their volume. Also, since the inertia forces acting on them are limited, they...

Deep groove ball bearings are similar to traditional bearings, but have the exact same groove dimensions as inward-moving balls. These deep grooves provide a more stable ball and can withstand a greater load than flat gear bearings. They still offer low friction and deep channels reducing vibration and noise while offering axial loading options. If you've seen ball bearings, you've probably...

Reciprocating compressor also broadly referred to as piston compressors are in particular used to move air/gasoline at excessive pressure to be saved and used for unique functions. The principal factors of the compressor are one or greater cylinders and pistons which flow within them. Automobile engines work nearly the same manner as reciprocating compressors do thru letting the air in from one...

Tapered roller bearing are roller bearings with a capacity to carry large axial forces. They are in good thrust that can withstand high radial forces as well. In tapered roller bearings, inner track ring and the outer ring raceway segments and got the pin when the rollers are made of a cone so that the conical surfaces and the bed of the shaft of the roller, when there are finally meets a...

Needle roller bearings have relatively small diameter cylindrical rolling elements whose length is much larger than their diameter. Compared with other types of rolling bearings, needle roller bearings have a small cross-sectional height and significant load-bearing capacity and rigidity relative to their volume. Also, because the inertial force acting on them is limited, they are an ideal...

Cylindrical roller bearing have high radial-load capacity and moderate thrust loads. They contain rollers which are cylindrically-shaped, but are not true cylinders. Instead, these rollers are crowned or end-relieved to reduce stress concentrations. This geometry results in low friction and allows for high-speed applications. Cylindrical roller bearings are commonly available in precision...