Vehicles run on tyres, but it is not the rubber material that supports their weight; it is the tyre pressure. Thus, it is necessary to maintain the pneumatic pressure correctly, making sure your tyres are not over or under-inflated. Measuring it regularly helps you to do that.

Checking your tyres should be a routine procedure. You should measure the tyre pressure at least once a month. Some may wonder if that is going overboard; it is not.

Need for tyre pressure maintenance:

As a driver, safety, yours and that sof others on the road is your primary concern. If the tyre pressure is incorrect, vehicle handling may be impacted. Stopping distance, adhesion ability and overall vehicle stability are affected negatively. Highly under-inflated tyres can cause your car or SUV to be at risk of hydroplaning. Thus, it becomes unsafe to drive on wet roads. The traction deficiency and general instability can heat the tyres, making them more prone to damage. Punctures and blowouts become more probable.

When your tyres have the correct inflation pressure, they perform better. Improved handling and quick response time become the norm. Thus, your rides become smooth and comfortable.

Incorrect inflation can inflict severe damage on the tread. Tyres abrade much faster when they run on low pressure. In case of over-inflation, there occurs an irregular wearing. Both of these lead you to replace the radials prematurely. Maintaining your tyres allows you to use them for a long time.

Besides, tyres running on low pressure tend to consume a higher amount of fuel, lowering your mileage by a long shot. When you inflate them back up to the correct pneumatic pressure, your expenses are also reduced.  

As we previously mentioned, under-inflated tyres use up a lot of fuel. Not only does that have an impact on your savings, but it also harms the environment. Fitting tyres having proper inflation cuts down the CO2 emissions, reducing your carbon footprint. 

The process behind tyre pressure measurement:

A particular tyre pressure range is fixed for every vehicle, based on its size by the manufacturer. Going above or below this domain implies over or under inflation, which we already know is a big no-no. To determine this pressure, measured in pounds per square inch (PSI) unit, we have to follow the steps given below.

  • A rise in temperature in the surroundings increases the pneumatic pressure. So, be sure to check the inflation pressure when the tyres are cold. That will make sure your readings are precise, with a lower error margin.
  • To figure out the appropriate pressure for your tyres, refer to the user manual provided by the manufacturer. Most guidebooks mention two values – one for regular use, another for full weightage. 
  • The instrument needed to measure the tyre pressure is called a gauge. You can get your own online or from an auto parts shop. If that is not an option, you can always use the one available at the petrol station, usually without paying a dime. 
  • To take the readings for all your Goodyear Tyres Coventry, first, take off the valve cap. Then, put the gauge right into the stem and bear down until there is no more air left. When the instrument indicates the figure, weigh it up with the ideal one suited to your car. In case it exceeds the recommended range, press in to release some air. If it falls below, inflate the tyres with the help of an air compressor. Close the valve with its cap firmly, and you are good to go! It is also worth stating that there is an alternative method that does not require you to put in the manual efforts we mentioned. Known as the Tyre Pressure Monitoring System (TMPS), it automatically detects a fall in the inflation pressure levels.

Final words: 

It is essential to maintain your tyres properly to keep them running for a long time. Irrespective of whether you fit premium or cheap tyres Coventry, ensuring they are inflated correctly is crucial. So, check your tyre pressure regularly and make your rides secure and enjoyable.