Canon Printer setup Troubleshooting Guide

Would you like to know how to set up the printer and fix its problems? You have arrived at the perfect locations to get the bit by bit guidelines and basic answers for most printer issues. Settle the issues and take the printing to the powerful utilizing Canon printer setup.

 

Canon Printer Unboxing

To unbox and set up your Canon printer, follow the guidelines that are given below.

  • Cut open the printer’s shipment package and remove all the packing materials.
  • Remove the plastic cover from the printer and place it on a clean table.
  • Take out the installation CD-ROM, setup manual, and other accessories from the box.
  • Read the setup manual before you begin with the canon printer setup
  • Remove the Styrofoam packaging from the sides of the printer.
  • Now, peel off the stickers from the printer.
  • Remove the packing materials from the scanner glass and feeder.
  • Grab the power cord provided with the printer and plug the cable into the power supply slot.
  • Attach the other terminal of the power cord into the printer’s rear.
  • Tap the Power button on the printer’s control panel and proceed to install the ink cartridges.
  • Now, load papers into the input tray and install the required printer driver on your computer.

 

Install Your Canon Printer Driver

Once you download the canon printer drivers from the link given on this site, follow the simple instructions provided below.

  • To start with the installation procedure, power off the Canon printer.
  • Now, start the installer on your computer. Click the link given on this site to download the printer drivers.
  • After the downloading process is complete, double-click on the printer icon in the Downloads folder.
  • In Windows computer, administrative rights are required to install or uninstall any software on your computer. Select OK or allow continuing with the printer driver installation process.
  • To use the Canon printer over a network, manually choose the connection destination from the client.
  • Click Cancel in the Connect Cable screen, and select yes on the confirmation screen.
  • Choose the Select Printer Port check box and click the Manual Selection option.
  • Choose the appropriate port and click Complete.
  • Restart your computer to conclude the canon printer driver installation.
    You can perform the same steps to install both the MP and XPS driver on your computer.

 

How to Print Using the Canon Printer?

To print documents or photos from your computer on your Canon Printer Technical Support, follow the next set of instructions.

  • Check if the Canon printer is turned on.
  • Open the printer’s paper input tray as well as the output tray.
  • Now, load a stack of A4 papers into the paper input tray.
  • Download and install the Canon printer drivers from the link given on this site.
  • Launch the Printer Driver Setup window and select the Quick Setup tab.
  • In the Commonly Used Settings box, select the printing profile suitable for your print job.
  • Make necessary changes to the print settings such as Media Type, Paper Size, etc., in the Printing Preferences window.
  • Choose Print Quality as High, Standard, or Draft according to your requirement.
  • Click Apply and complete the canon printer setup.
  • Now the select a document that you want to print and click Print.
  • The Canon printer will start printing the selected documents.

 

How To Scan Documents Using A Canon Printer?

To scan documents or photos on your Canon printer, download the IJ Scan Utility and start the installation.

  • Power on the Canon printer by pressing the Power button.
  • The full feature driver version includes the IJ Scan Utility.
  • Otherwise, download the IJ Scan Utility from the manufacturer’s site.
  • Now, place the original that you want to scan on the scanner glass.
  • If your printer has the Scan button, tap it, and the scanned document will appear on your computer.
  • If your printer does not have the Scan button, start the Scan Utility, and connect the printer to your computer.
  • Now, the printer will start to scan the documents placed on the scanner glass.
  • Make the necessary changes to the settings on the preview scan and click Scan.
  • Set the scan resolution and click OK.
  • Assign a folder in which you want to save the scanned document and click Save.

 

Conclusions : This post is will be useful also for those who are looking for ij.start canon setup visit at ij.start canon for more information and References are provided for informational purposes only and do not constitute an endorsement of any websites or other sources. We have a technical team of professionals who use unique ways to resolve common printer queries. The availability of our technicians is 24*7 hours; feel free to reach us. We have professionals who will initially deeply analyze the issue and then provide better assistance Canon PrinterCustomSupport Number 1-855-800-3376.