The  rate of the biomass pellet production line is  figured out by the raw materials  utilized. For example, if the raw materials are branches  and also trunks with high  wetness content, they  must be chipped - crushed - dried - granulated -  stuffed -  delivered. It  generally  relies on what  resources are  utilized. 350 type biomass pellet  maker equipment 38,000,  design: 350  kind 300 ~ 500 kg per  hr, 450  kind 500 ~ 800 kg, 560  kind 1 ~ 1.5 tons, 600 type 2  bunches, 850  kind 3 ~ 4  bunches.

The  great  marketing in Indonesia biomass pellet production line price relies on your  basic materials and  result size.  First off, you need to  recognize what your  basic materials are. The raw  products are  prefabricated sawdust or wood chips and the moisture  web content of the materials is 10%-15%. A  manufacturing facility  provided  brand-new technology  timber pellet  device is enough. If your  resources are unprocessed logs, branches, etc  require to be  crushed by a  timber chipper  as well as biomass crusher,  after that  dried out in a dryer (if the  dampness exceeds 15%, it needs to be dried),  after that the main machine is granulated,  and after that the packaging machine  loads this set of  assembly line.

 Understanding your  basic materials  has to do with the output. The  outcome of the RICHI biomass pellet mill device is different  as well as the  design is different, so the price is  additionally different. The biomass pellet production line  rate is not  just a  issue of reporting a number,  however it is necessary to  develop a  strategy  and also quotation according to your requirements.

 To start with, the raw  product moisture  demands of wood pellets are  really  stringent. The  dampness  material of the  product is  too expensive, which  obstructs the die  openings,  to make sure that the particles can not be  generated; if the moisture  web content of the material is  as well low, if it is too dry, it is  hard to  create, and the  thickness is not enough.

Related case: 5T/H wood pellet factory in Austria

 Normally 12%-13%, 15-20% of the raw  product  dampness after  inflection is the standard for  pushing  timber pellets. If the raw  product  dampness is  expensive, the  mold and mildew resistance  and also slipping phenomenon will  take place after the raw material enters the biomass pelletizer ring  pass away;  take notice of control the moisture  material of the raw material before  getting in the biomass pelleting  maker, If the water content is too high, there will be slippage in the ring die,  leading to the phenomenon that it is  difficult to  release.

More details:

If your  basic material  dampness meets the requirements, a biomass wood pellet press machine can  create wood pellets. If it does not  satisfy the requirements, it  requires to be  dried out, so it  requires to be equipped with a  timber dryer and a  warm blast stove.  Obviously this is if your  basic material is  timber chips. If your  resources is wood chips ( density less than 0.5 mm), it needs to be  shattered, which is equivalent to adding  an additional process. Some  consumers'  resources are bark, which is  additionally possible after  including a wood pulverizer.
However, some customers' raw materials are wood scraps,  since the  rate of  timber scraps is cheap and  very easy to  acquire, so there are  several  instances,  after that it is  needed to add a  timber chipper, first to  reduce the non-standard wood scraps  right into  timber chips,  and after that  most likely to  squash.
For some  clients whose  resources are waste  structure  layouts, it is necessary to change the wood chipper to a bamboo plywood crusher.

Because the bamboo plywood itself has  several iron nails, it is  really easy to damage the  blade on the wood chipper when using a wood chipper.  An additional reason is that the waste building  theme is relatively  large,  as well as the feed port of the wood chipper is  normally 1250px.

It is impossible to manually  damage it  ahead of time, right? The bamboo plywood crusher can enter  any type of bamboo plywood with a feed opening of less than 1.25 m, and the gnawing  blade of the bamboo plywood crusher is an ingot knife, and the iron nails have little effect on him.

Unlike wood chippers, the blades are easily damaged. Bamboo plywood is  additionally an advantage of making  timber pellets. Generally, its  dampness  material is  really  little, between 15-20%.  Consequently,  utilizing bamboo plywood as pellets saves the trouble of  timber drying  equipments.