The micro drip system has become a preferred choice for many in New Zealand. The mechanism is useful for providing a slow and consistent amount of water to the roots. Ideal for water conservation, drip irrigation is a practical solution to save our environment. Any water loss caused by overwatering or evaporation is not a challenge for this wonderful irrigation system.
Moreover, drip irrigation has become a priority for saving installation time. You can quickly install the watering system and save time that is otherwise required for burying the sprinkler pipes or valves.
Micro drip irrigation is undeniably the best irrigation system design in NZ, but that doesn’t mean practise and planning are not needed. Drip systems are easy to maintain, but they do clog. Longevity and maintenance factors are the key aspects when choosing the right product. Find some useful insights discussed in this post for an informed purchase and hassle-free installation of a micro drip irrigation system.
Drip irrigation system design
You need to consider a large number of components when designing a drip irrigation system. For instance, polyethylene drip tubing, fittings, emitters, filters, and fertiliser injectors (if needed).
Drip lines can burst from higher water pressure, so a pressure regulator is also needed. If you want to automate the system, you can also invest in a battery powered timer or fully automated smart controllers
Things to know before you buy
Drip irrigation systems come in pre-packaged kits that work well for levelled and compact gardens. For complicated designs and dense vegetable gardens, the emission points should be installed as part of a custom designed irrigation system. It might sound like extra work, but custom designs are best to ensure 100% land utilisation,especially in hard to reach landscaping areas. Moreover, the density of the emitters also depends on the soil type. You might have to buy a higher number of emitters for sandy soil and fewer for clay soil.
Planning the installation
Installation design can be planned with a rough sketch of the garden, however it is best to measure and accurately plan your design. Emitters can be placed for each plant if the plantsare spacedwell apart. For closely placed plants, you can reduce the number of emitters and plan the irrigation design accordingly.
The size of the tubing can be planned on the basis of the water flow. Increase the outflow by adding more emitters. If you are not good at maths, call an installation expert for help.
Installation and maintenance
Installation is relatively simple and faster with a drip irrigation system. It is easier to lay the tubing or add branch lines for extra emitters than in other types of irrigation Some specialty tools are required for efficient installation. If you are installing on your own, make sure the tubing is softened before installation by leaving it in the sun.
Identifying clogs, holes, or leaks is very easy in a drip irrigation system. Clean the emitters with a thin wire and make sure to flush out the system when repairing a slit in the tubing. Periodic maintenance is important for the efficient functioning of the system. For pressure checks, cleaning and repairing, it is best to call the experts.
Save water, save energy and get higher yields from your crops through micro drip irrigation. Highly demanded in edible gardens and largerhoticulturalareas, it is the best irrigation system in New Zealand. To ensure uniform application of water and energy savings, you need to do the maths carefully and plan the system design. Ideally, for greater ROI, you should also speak to the industry experts and plan an efficient system.
If interested, visit the link given below and get a quote from Think Water. With more than 18 stores across the country, they have become the industry leaders with an unmatched collection of irrigation systems, pumping solutions, water filters for homes, and water valves in Auckland.