If your HP printer is not connecting to your Wi-Fi network, you can try the following troubleshooting steps to resolve the issue, to know more about hp printer not connecting to wifi:

  1. Check Wi-Fi Signal: Ensure that your Wi-Fi signal is strong enough. If the signal is weak, move the printer closer to the router.

  2. Restart the Printer: Turn off your HP printer, wait for a minute, and then turn it back on. This can often resolve connectivity issues.

  3. Restart Your Router: Turn off your Wi-Fi router, wait for a minute, and then turn it back on. This can refresh the network and might help the printer connect.

  4. Reconnect to Wi-Fi Network: On the printer's control panel or touchscreen, go to the Wireless or Network settings and try to reconnect to your Wi-Fi network. Make sure you enter the correct Wi-Fi password.

  5. Wireless Direct Mode: Some HP printers have a feature called "Wireless Direct" or "Wi-Fi Direct" that allows you to connect your mobile device directly to the printer. If this is enabled, make sure it's turned off when you want to connect the printer to your home network.

  6. Network Name (SSID): Ensure that your Wi-Fi network name (SSID) is being broadcast. If your network is hidden, you'll need to manually enter the SSID and password on the printer.

  7. Security Settings: Check the security settings on your router. Make sure your printer's security settings match the network settings (e.g., WEP, WPA, or WPA2).

  8. Update Firmware: Check if there are any firmware updates available for your printer. Updating the firmware can sometimes resolve connectivity issues.

  9. Disable VPN: If you are using a VPN, try disconnecting from it, as it may interfere with the printer's ability to connect to your local network.

  10. Firewall/Antivirus Software: Sometimes, security software can block printer connections. Temporarily disable or configure your firewall and antivirus software to allow the printer to connect.

  11. Reset Network Settings: If nothing else works, you can try resetting your printer's network settings to the default. This will erase any existing network configurations, and you'll need to set it up again.

  12. Contact HP Support: If you've tried all the above steps and your printer still won't connect to Wi-Fi, you may need to contact HP's customer support for further assistance. To know more about hp printer won't connect to wifi network.

Keep in mind that the specific steps may vary depending on your HP printer model, so consult your printer's manual or HP's official support documentation for model-specific instructions.