Sponsored

  • Stability Testing Methods for Small Molecule Drug Formulations in Oral Syrups

    Stability testing is paramount for maintaining the quality and efficacy of small molecule drug formulations in oral syrups. In this blog post, we'll discuss key stability testing methods and considerations specific to oral syrups to ensure product stability throughout their shelf life.

    1. Chemical Stability Assessment

    Chemical stability assessment evaluates the degradation kinetics of active pharmaceutical ingredients (APIs) in oral syrups under various storage conditions. Accelerated stability studies, conducted at elevated temperatures and humidity levels, help predict long-term stability and establish shelf-life expiration dates. Compatibility studies with sweeteners, flavoring agents, and preservatives are essential to identify potential interactions that may impact drug stability.

    2. Physical Stability Evaluation

    Physical stability evaluation involves monitoring the appearance, viscosity, and sedimentation of oral syrups over time. Visual inspection for changes in color, clarity, or particulate matter is performed regularly. Viscosity testing ensures that syrups maintain their desired consistency and flow properties, facilitating accurate dosing and patient acceptance.

    3. Rheological Characterization

    Rheological characterization assesses the flow properties and viscosity of oral syrups under various shear conditions. Rheological tests, such as viscosity measurements and flow behavior analysis, provide valuable information on formulation behavior and stability. Rheological data help ensure that syrups maintain their structural integrity and dosing accuracy throughout their shelf life.

    4. Microbial Stability Testing

    Microbial stability testing is critical for oral syrups formulated with water-based vehicles or susceptible to microbial contamination. Preservative efficacy testing assesses the effectiveness of antimicrobial agents in preventing microbial growth. Environmental monitoring and microbial limit testing ensure that syrups meet microbial quality standards and remain free from contamination during storage and use.

    5. Packaging Compatibility Evaluation

    Packaging compatibility evaluation assesses the interaction between oral syrups and their primary packaging materials. Stability studies are conducted under various environmental conditions, including exposure to light, moisture, and oxygen permeation. Container closure integrity testing ensures that packaging maintains its barrier properties and prevents moisture ingress or drug degradation.

    Conclusion

    A comprehensive stability testing approach for small molecule drug formulations in oral syrups involves assessing chemical stability, physical stability, rheological properties, microbial stability, and packaging compatibility. By implementing robust testing methodologies and adhering to regulatory guidelines, manufacturers can ensure the quality, efficacy, and safety of oral syrups from formulation development to commercialization.
    For more information on stability testing of small molecule drug formulations, visit https://renejix.com/product-development/analytical-services/stability-testing-storage/
    Stability Testing Methods for Small Molecule Drug Formulations in Oral Syrups Stability testing is paramount for maintaining the quality and efficacy of small molecule drug formulations in oral syrups. In this blog post, we'll discuss key stability testing methods and considerations specific to oral syrups to ensure product stability throughout their shelf life. 1. Chemical Stability Assessment Chemical stability assessment evaluates the degradation kinetics of active pharmaceutical ingredients (APIs) in oral syrups under various storage conditions. Accelerated stability studies, conducted at elevated temperatures and humidity levels, help predict long-term stability and establish shelf-life expiration dates. Compatibility studies with sweeteners, flavoring agents, and preservatives are essential to identify potential interactions that may impact drug stability. 2. Physical Stability Evaluation Physical stability evaluation involves monitoring the appearance, viscosity, and sedimentation of oral syrups over time. Visual inspection for changes in color, clarity, or particulate matter is performed regularly. Viscosity testing ensures that syrups maintain their desired consistency and flow properties, facilitating accurate dosing and patient acceptance. 3. Rheological Characterization Rheological characterization assesses the flow properties and viscosity of oral syrups under various shear conditions. Rheological tests, such as viscosity measurements and flow behavior analysis, provide valuable information on formulation behavior and stability. Rheological data help ensure that syrups maintain their structural integrity and dosing accuracy throughout their shelf life. 4. Microbial Stability Testing Microbial stability testing is critical for oral syrups formulated with water-based vehicles or susceptible to microbial contamination. Preservative efficacy testing assesses the effectiveness of antimicrobial agents in preventing microbial growth. Environmental monitoring and microbial limit testing ensure that syrups meet microbial quality standards and remain free from contamination during storage and use. 5. Packaging Compatibility Evaluation Packaging compatibility evaluation assesses the interaction between oral syrups and their primary packaging materials. Stability studies are conducted under various environmental conditions, including exposure to light, moisture, and oxygen permeation. Container closure integrity testing ensures that packaging maintains its barrier properties and prevents moisture ingress or drug degradation. Conclusion A comprehensive stability testing approach for small molecule drug formulations in oral syrups involves assessing chemical stability, physical stability, rheological properties, microbial stability, and packaging compatibility. By implementing robust testing methodologies and adhering to regulatory guidelines, manufacturers can ensure the quality, efficacy, and safety of oral syrups from formulation development to commercialization. For more information on stability testing of small molecule drug formulations, visit https://renejix.com/product-development/analytical-services/stability-testing-storage/
    RENEJIX.COM
    Stability Testing & Storage
    Comprehensive release testing, stability testing, storage under various conditions to predict your product's shelf life accurately.
    0 Comments 0 Shares
  • Keeping Cool on the Move: Refrigerated Freight Services Explained

    Refrigerated freight services play a critical role in transporting temperature-sensitive goods across various industries. These services ensure that perishable items such as food, pharmaceuticals, and chemicals maintain their freshness and integrity throughout the journey. Utilizing specialized refrigerated trucks or containers, these services control temperature and humidity levels to preserve the quality of the cargo. From farm to table, medical facilities to manufacturing plants, refrigerated freight services provide a reliable solution for delivering goods that require constant temperature control. With advanced technology and stringent regulations, these services guarantee the safe and efficient transportation of perishable goods, keeping them cool on the move.

    To know more visit here: https://northernrefrigerated.com/
    Keeping Cool on the Move: Refrigerated Freight Services Explained Refrigerated freight services play a critical role in transporting temperature-sensitive goods across various industries. These services ensure that perishable items such as food, pharmaceuticals, and chemicals maintain their freshness and integrity throughout the journey. Utilizing specialized refrigerated trucks or containers, these services control temperature and humidity levels to preserve the quality of the cargo. From farm to table, medical facilities to manufacturing plants, refrigerated freight services provide a reliable solution for delivering goods that require constant temperature control. With advanced technology and stringent regulations, these services guarantee the safe and efficient transportation of perishable goods, keeping them cool on the move. To know more visit here: https://northernrefrigerated.com/
    0 Comments 0 Shares
  • High-Humidity Regions: Buildings in humid areas are more susceptible to mold and mildew growth. Proper ventilation and moisture control, along with periodic restoration services, are crucial to prevent mold-related issues.

    Low-Humidity Regions: In dry climates, low humidity levels can lead to moisture loss in building materials, resulting in cracking and deterioration. Restoration services can address these issues and extend the lifespan of the building. https://www.dealerbaba.com/suppliers/business-services/others-services/roof-restorations-and-waterproofing-inc.html
    High-Humidity Regions: Buildings in humid areas are more susceptible to mold and mildew growth. Proper ventilation and moisture control, along with periodic restoration services, are crucial to prevent mold-related issues. Low-Humidity Regions: In dry climates, low humidity levels can lead to moisture loss in building materials, resulting in cracking and deterioration. Restoration services can address these issues and extend the lifespan of the building. https://www.dealerbaba.com/suppliers/business-services/others-services/roof-restorations-and-waterproofing-inc.html
    WWW.DEALERBABA.COM
    Roof Restorations and Wate in Others in Fort Lauderdale
    Roof Restorations and Wate in Others in Fort Lauderdale. Search global businesses, suppliers, manufacturers, exporters & importers at Dealerbaba
    0 Comments 0 Shares
  • Top 8 Reasons for Installing an Air Conditioner

    Air Conditioning Installation in Sydney is important for contemporary life. You will stay healthy and productive all day. This keeps the temperature under control and reduces the humidity levels. You will not feel the hotness of the outside. Visit here: https://globalacr.blogspot.com/2023/08/air-conditioning-installation-sydney.html
    Top 8 Reasons for Installing an Air Conditioner Air Conditioning Installation in Sydney is important for contemporary life. You will stay healthy and productive all day. This keeps the temperature under control and reduces the humidity levels. You will not feel the hotness of the outside. Visit here: https://globalacr.blogspot.com/2023/08/air-conditioning-installation-sydney.html
    GLOBALACR.BLOGSPOT.COM
    Top 8 Reasons for Installing an Air Conditioner
    Air Conditioning Installation in Sydney is important for contemporary life. You will stay healthy and productive all day. This keeps the t...
    0 Comments 0 Shares
  • Discover The 15 Benefits Of Sleeping In An Air Conditioner
    Introduction
    Sleep is an essential aspect of our lives, and the quality of our sleep can significantly impact our overall well-being. As temperatures rise during the summer months, finding a comfortable sleeping environment becomes increasingly challenging. This is where air conditioners come to the rescue, providing a blissful haven of coolness on hot nights. In this article, we will explore the various benefits of sleeping in an air-conditioned room, ensuring a restful and rejuvenating slumber.

    If you want to buy a new air conditioner then contact best ac dealers in Kolkata, you should look for one with all the features you plan to use.

    Understanding Air Conditioner and its Working Principle
    What is an Air Conditioner?
    An air conditioner, commonly referred to as AC, is a device that regulates indoor temperature and humidity levels. It works on the principle of extracting heat from the air inside the room and expelling it outside, leaving behind a cool and pleasant environment.

    How Does an Air Conditioner Work?
    Air conditioners employ a refrigeration cycle to cool the air. The process involves compressing and expanding refrigerant gases to absorb heat from the indoor air and dissipate it outside. This continuous cycle allows the AC to maintain a comfortable and refreshing temperature indoors.

    The Advantages of Sleeping in Air Conditioner
    1. Improved Sleep Quality
    Sleeping in an adequately cooled room promotes better sleep quality. A comfortable environment helps the body relax, leading to deeper and uninterrupted sleep cycles, leaving you feeling refreshed and energized upon waking up.

    2. Temperature Regulation
    An air conditioner allows you to set the desired temperature, ensuring that your room remains cool and pleasant throughout the night. This temperature regulation enhances comfort and reduces disturbances caused by excessive heat.

    3. Humidity Control
    AC units not only cool the air but also help in controlling indoor humidity levels. By removing excess moisture from the air, air conditioners create a dry and comfortable atmosphere that is less conducive to mold and dust mites, which can trigger allergies and respiratory issues.

    4. Allergen Reduction
    Air conditioners with proper filters can effectively trap dust, pollen, and other airborne allergens. As a result, the indoor air becomes cleaner, reducing the risk of allergic reactions and respiratory problems, especially for individuals with asthma or allergies.

    5. Noise Reduction
    Modern air conditioners are designed to operate quietly, creating a serene sleeping environment free from disruptive noise. This serene ambiance aids in falling asleep faster and staying asleep longer.

    6. Enhanced Air Circulation
    Air conditioners circulate and filter the air, preventing it from becoming stagnant. Proper air circulation promotes better breathing and reduces the risk of airborne illnesses.

    7. Relaxation and Comfort
    A cool and cozy room sets the perfect stage for relaxation. With the soothing breeze of the AC, you can unwind and de-stress before bedtime, setting the tone for a peaceful slumber.

    8. Preventing Heat-Related Illnesses
    Sleeping in a cool room helps prevent heat-related illnesses, such as heat exhaustion and heatstroke, particularly during heatwaves.
    Discover The 15 Benefits Of Sleeping In An Air Conditioner Introduction Sleep is an essential aspect of our lives, and the quality of our sleep can significantly impact our overall well-being. As temperatures rise during the summer months, finding a comfortable sleeping environment becomes increasingly challenging. This is where air conditioners come to the rescue, providing a blissful haven of coolness on hot nights. In this article, we will explore the various benefits of sleeping in an air-conditioned room, ensuring a restful and rejuvenating slumber. If you want to buy a new air conditioner then contact best ac dealers in Kolkata, you should look for one with all the features you plan to use. Understanding Air Conditioner and its Working Principle What is an Air Conditioner? An air conditioner, commonly referred to as AC, is a device that regulates indoor temperature and humidity levels. It works on the principle of extracting heat from the air inside the room and expelling it outside, leaving behind a cool and pleasant environment. How Does an Air Conditioner Work? Air conditioners employ a refrigeration cycle to cool the air. The process involves compressing and expanding refrigerant gases to absorb heat from the indoor air and dissipate it outside. This continuous cycle allows the AC to maintain a comfortable and refreshing temperature indoors. The Advantages of Sleeping in Air Conditioner 1. Improved Sleep Quality Sleeping in an adequately cooled room promotes better sleep quality. A comfortable environment helps the body relax, leading to deeper and uninterrupted sleep cycles, leaving you feeling refreshed and energized upon waking up. 2. Temperature Regulation An air conditioner allows you to set the desired temperature, ensuring that your room remains cool and pleasant throughout the night. This temperature regulation enhances comfort and reduces disturbances caused by excessive heat. 3. Humidity Control AC units not only cool the air but also help in controlling indoor humidity levels. By removing excess moisture from the air, air conditioners create a dry and comfortable atmosphere that is less conducive to mold and dust mites, which can trigger allergies and respiratory issues. 4. Allergen Reduction Air conditioners with proper filters can effectively trap dust, pollen, and other airborne allergens. As a result, the indoor air becomes cleaner, reducing the risk of allergic reactions and respiratory problems, especially for individuals with asthma or allergies. 5. Noise Reduction Modern air conditioners are designed to operate quietly, creating a serene sleeping environment free from disruptive noise. This serene ambiance aids in falling asleep faster and staying asleep longer. 6. Enhanced Air Circulation Air conditioners circulate and filter the air, preventing it from becoming stagnant. Proper air circulation promotes better breathing and reduces the risk of airborne illnesses. 7. Relaxation and Comfort A cool and cozy room sets the perfect stage for relaxation. With the soothing breeze of the AC, you can unwind and de-stress before bedtime, setting the tone for a peaceful slumber. 8. Preventing Heat-Related Illnesses Sleeping in a cool room helps prevent heat-related illnesses, such as heat exhaustion and heatstroke, particularly during heatwaves.
    0 Comments 0 Shares
  • Effective Mold Removal and Restoration Techniques for a Healthy Living Environment  


    In a healthy living environment, cleanliness is essential, and the eradication of mold growth is pivotal to maintaining this condition. Mold is a type of fungus that thrives in damp and poorly ventilated areas, releasing spores that can trigger allergies and other health complications. To maintain a healthy home environment, it’s important to be proactive in detecting and eliminating mold. This article will discuss effective mold removal and restoration techniques.
    The first step in mold removal is detection. Mold often manifests as a discoloration on surfaces, with a distinctive musty odor. Bathrooms, kitchens, basements, and other damp areas are usually the prime spots for mold development. Should you notice these signs, it’s advisable to act immediately. Remember, prolonged exposure to mold can lead to serious health issues like asthma, allergies, and respiratory infections.
    Once identified, the initial step in mold removal is containing the area to prevent the spores from spreading during the clean-up process. This can be done using plastic sheeting and tape to seal off the affected area. The next stage involves cleaning the mold-infested areas. For small mold problems, a simple mixture of detergent and water might be effective. However, for more stubborn mold, a solution containing one cup of bleach to one gallon of water is recommended. Always wear gloves, goggles, and a mask during the cleaning process for safety. Remember to scrub the area thoroughly and allow it to dry completely to prevent the mold from regrowing.
    For more extensive mold issues, hiring a professional mold remediation company may be necessary. These companies have the equipment and training to deal with large mold problems, often involving specialized techniques such as HEPA vacuuming, using antimicrobial agents, and structural drying. They can also help in identifying the source of the mold, which is crucial in preventing future infestations.
    After successful mold removal, restoration of the affected area is the next step. This could involve replacing damaged materials like drywall, insulation, and carpeting. The restoration process should also include taking steps to control the humidity levels in your home, as high humidity can encourage mold growth. Investing in a good-quality dehumidifier can be beneficial in maintaining optimal humidity levels.
    Prevention is always better than cure. Hence, to avoid recurring mold issues, homeowners should adopt preventive measures. Regular cleaning, especially in areas prone to dampness, is a good starting point. Additionally, ensuring adequate ventilation in your home, particularly in the bathroom and kitchen, can greatly reduce the risk of mold growth. If you notice any water leaks in your home, fix them immediately, as they can create the perfect breeding ground for mold.
    Lastly, maintaining a good indoor air quality is essential for a healthy living environment. Indoor plants can help purify the air, and air purifiers equipped with HEPA filters can capture mold spores floating around. Regular inspection and maintenance of HVAC systems can also reduce the spread of mold spores in your home.
    Conclusion
    In conclusion, mold removal and restoration are important steps towards creating a healthy living environment. These processes, combined with preventative measures and regular home maintenance, can effectively keep your home mold-free. Remember, the health implications of mold infestation can be serious, making it crucial for homeowners to remain vigilant and proactive in mold detection and removal.
    https://funguyinspections.com/effective-mold-removal-and-restoration-techniques-for-a-healthy-living-environment/
    Effective Mold Removal and Restoration Techniques for a Healthy Living Environment   In a healthy living environment, cleanliness is essential, and the eradication of mold growth is pivotal to maintaining this condition. Mold is a type of fungus that thrives in damp and poorly ventilated areas, releasing spores that can trigger allergies and other health complications. To maintain a healthy home environment, it’s important to be proactive in detecting and eliminating mold. This article will discuss effective mold removal and restoration techniques. The first step in mold removal is detection. Mold often manifests as a discoloration on surfaces, with a distinctive musty odor. Bathrooms, kitchens, basements, and other damp areas are usually the prime spots for mold development. Should you notice these signs, it’s advisable to act immediately. Remember, prolonged exposure to mold can lead to serious health issues like asthma, allergies, and respiratory infections. Once identified, the initial step in mold removal is containing the area to prevent the spores from spreading during the clean-up process. This can be done using plastic sheeting and tape to seal off the affected area. The next stage involves cleaning the mold-infested areas. For small mold problems, a simple mixture of detergent and water might be effective. However, for more stubborn mold, a solution containing one cup of bleach to one gallon of water is recommended. Always wear gloves, goggles, and a mask during the cleaning process for safety. Remember to scrub the area thoroughly and allow it to dry completely to prevent the mold from regrowing. For more extensive mold issues, hiring a professional mold remediation company may be necessary. These companies have the equipment and training to deal with large mold problems, often involving specialized techniques such as HEPA vacuuming, using antimicrobial agents, and structural drying. They can also help in identifying the source of the mold, which is crucial in preventing future infestations. After successful mold removal, restoration of the affected area is the next step. This could involve replacing damaged materials like drywall, insulation, and carpeting. The restoration process should also include taking steps to control the humidity levels in your home, as high humidity can encourage mold growth. Investing in a good-quality dehumidifier can be beneficial in maintaining optimal humidity levels. Prevention is always better than cure. Hence, to avoid recurring mold issues, homeowners should adopt preventive measures. Regular cleaning, especially in areas prone to dampness, is a good starting point. Additionally, ensuring adequate ventilation in your home, particularly in the bathroom and kitchen, can greatly reduce the risk of mold growth. If you notice any water leaks in your home, fix them immediately, as they can create the perfect breeding ground for mold. Lastly, maintaining a good indoor air quality is essential for a healthy living environment. Indoor plants can help purify the air, and air purifiers equipped with HEPA filters can capture mold spores floating around. Regular inspection and maintenance of HVAC systems can also reduce the spread of mold spores in your home. Conclusion In conclusion, mold removal and restoration are important steps towards creating a healthy living environment. These processes, combined with preventative measures and regular home maintenance, can effectively keep your home mold-free. Remember, the health implications of mold infestation can be serious, making it crucial for homeowners to remain vigilant and proactive in mold detection and removal. https://funguyinspections.com/effective-mold-removal-and-restoration-techniques-for-a-healthy-living-environment/
    0 Comments 0 Shares
  • Vacuum Storage Bags
    https://variance.pk/product/vacuum-bags/

    Keep your home clean and dust free with our superior quality vacuum storage bags Vacuum bags for clothes protects from moisture, humidity, and pests
    Vacuum Storage Bags https://variance.pk/product/vacuum-bags/ Keep your home clean and dust free with our superior quality vacuum storage bags Vacuum bags for clothes protects from moisture, humidity, and pests
    VARIANCE.PK
    Pakistan's # 1 Vacuum Storage Bags - Upto 80% more space
    Keep your home clean and dust-free with our superior quality vacuum storage bags. Vacuum bags for clothes protects from moisture, humidity, and pests.
    0 Comments 0 Shares
  • Vacuum Storage Bags
    https://variance.pk/product/vacuum-bags/

    Keep your home clean and dust free with our superior quality vacuum storage bags Vacuum bags for clothes protects from moisture, humidity, and pests
    Vacuum Storage Bags https://variance.pk/product/vacuum-bags/ Keep your home clean and dust free with our superior quality vacuum storage bags Vacuum bags for clothes protects from moisture, humidity, and pests
    0 Comments 0 Shares
  • Technical parameters
    2.1 General
    2.1.1 Application This specification is applied to Push Button Switch used for electronic equipment.
    2.1.2 Operating temperature range -25鈩?锝?+55鈩?br/> 2.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows
    2.1.4 Test conditions
    Ambient temperature 15~35鈩?br/> Relative humidity 45~85%
    Air pressure 86~106kPa (860~1060 mbar)
    If any doubt arise from the judgment, tests shall be conducted at the following conditions.
    Ambient temperature锛?20卤2鈩?br/> Relative humidity 60~70%
    Air pressure 86~106kPa (860~1060 mbar)
    2.2 Appearance construction and dimensions
    2.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures.
    2.2.2 Construction and dimensions Refer to individual product drawing.

    2.3. ELECTRICAL SPECIFICATION
    NO.ItemsTest conditionsRequirements
    2.3.1Contact
    resistanceMeasured at 1khz small current(100mA or less)
    50m惟 MAX
    2.3.2Insulation
    resistanceApply a voltage of 1000VDC for 1 min.
    to following portions after which
    measurement shall be made.
    between terminals1000M惟 MIN
    2.3.3Dielectric
    Strength
    AC 2000V RMS(50-60HZ)for 1 min trip
    between terminals.
    Without damage to parts
    Arcing or breakdown etc


    2.4. ENVIRONMENT RESISTANCE
    NO.ItemsTest conditionsRequirements
    2.4.1Cold test
    The switch shall be stored at a
    temperature of -20卤3鈩?for 96 hours.
    Then the switch shall be maintained at
    standard atmospheric conditions for 1
    hour after which measurement shall be made.
    There shall be no
    deformation or cracks in
    Molded part.

    2.4.2Heat resistanceThe switch shall be stored at a
    temperature of 55卤3鈩?for 96 hours.
    Then the switch shall be maintained at
    standard atmospheric conditions for 1
    hour after which measurement shall be made.

    2.4.3Humidity
    test
    The switch shall be stored ata temperature
    of 40卤2鈩?and a humifity of 90% to 95%
    for 96 hours.then the switch shall be
    maintained at standard atmospheric
    condition for 1 hour after which
    measurement shall be made.

    2.4.4Standard
    conditions
    Unless otherwise specified.
    the standard range of atmospheric
    conditions for making measurements
    and tests are as follows:
    (1)Temperature:40卤2鈩?/p>
    (2)Relative Humidity:90~95%
    (3)Time:96 hours.


    3. DRAWING & DIMENSION:
    4.Product application
    Enormous remote
    controller and portable remote controller
    Instrumentation
    Medical equipment
    Telecommunications and networking equipment
    Computers & peripherals
    Instrumentation and controls
    Industrial electronic equipment
    Industrial remote controller
    Medical Equipment
    Communication
    Outdoor Controls
    Public building, Home security, Business building, Industrial equipment鈥tc.
    5.Remarks
    PARTS LIST:
    NO.quantityItemsMaterial
    11BushingStainless Steel
    21BasePBT (UL 94-V0), PC( UL 94-V2)
    3 1ActuatorPc; Stainless Steel
    41Inner AssemblyPOM/ PA66
    51SpringSpring Steel
    61SealingSilicone
    71O-ringSilicone
    85Terminal/ ContactCopper, silver plated/ contact锛歝opper , gold plated
    91Hex NutNickel plated brass
    Returned plastic should not exceed 20%.
    6.Delivery,shipping and service

    7.FAQ
    Q锛歐hat is your main market?
    A:Europe, The North America, South America, Australia, The middle east, and etc.
    Q: What鈥檚 your after-sale service?
    A: Our quality warranty period is one year. Any quality problem will be solved to customer satisfactions.
    Q锛欼s the sample available?
    A:Yes, we are providing free of samples are available for you to check the quality once confirmed after 1~2day. Push Button Switch suppliers
    website:http://www.switechchina.com/push-button-switch/
    Technical parameters 2.1 General 2.1.1 Application This specification is applied to Push Button Switch used for electronic equipment. 2.1.2 Operating temperature range -25鈩?锝?+55鈩?br/> 2.1.3 Test conditions Unless otherwise specified. The atmospheric conditions for making measurements and tests are as follows 2.1.4 Test conditions Ambient temperature 15~35鈩?br/> Relative humidity 45~85% Air pressure 86~106kPa (860~1060 mbar) If any doubt arise from the judgment, tests shall be conducted at the following conditions. Ambient temperature锛?20卤2鈩?br/> Relative humidity 60~70% Air pressure 86~106kPa (860~1060 mbar) 2.2 Appearance construction and dimensions 2.2.1 Appearance Switch shall have good finishing, and no rust crack or plating failures. 2.2.2 Construction and dimensions Refer to individual product drawing. 2.3. ELECTRICAL SPECIFICATION NO.ItemsTest conditionsRequirements 2.3.1Contact resistanceMeasured at 1khz small current(100mA or less) 50m惟 MAX 2.3.2Insulation resistanceApply a voltage of 1000VDC for 1 min. to following portions after which measurement shall be made. between terminals1000M惟 MIN 2.3.3Dielectric Strength AC 2000V RMS(50-60HZ)for 1 min trip between terminals. Without damage to parts Arcing or breakdown etc 2.4. ENVIRONMENT RESISTANCE NO.ItemsTest conditionsRequirements 2.4.1Cold test The switch shall be stored at a temperature of -20卤3鈩?for 96 hours. Then the switch shall be maintained at standard atmospheric conditions for 1 hour after which measurement shall be made. There shall be no deformation or cracks in Molded part. 2.4.2Heat resistanceThe switch shall be stored at a temperature of 55卤3鈩?for 96 hours. Then the switch shall be maintained at standard atmospheric conditions for 1 hour after which measurement shall be made. 2.4.3Humidity test The switch shall be stored ata temperature of 40卤2鈩?and a humifity of 90% to 95% for 96 hours.then the switch shall be maintained at standard atmospheric condition for 1 hour after which measurement shall be made. 2.4.4Standard conditions Unless otherwise specified. the standard range of atmospheric conditions for making measurements and tests are as follows: (1)Temperature:40卤2鈩?/p> (2)Relative Humidity:90~95% (3)Time:96 hours. 3. DRAWING & DIMENSION: 4.Product application Enormous remote controller and portable remote controller Instrumentation Medical equipment Telecommunications and networking equipment Computers & peripherals Instrumentation and controls Industrial electronic equipment Industrial remote controller Medical Equipment Communication Outdoor Controls Public building, Home security, Business building, Industrial equipment鈥tc. 5.Remarks PARTS LIST: NO.quantityItemsMaterial 11BushingStainless Steel 21BasePBT (UL 94-V0), PC( UL 94-V2) 3 1ActuatorPc; Stainless Steel 41Inner AssemblyPOM/ PA66 51SpringSpring Steel 61SealingSilicone 71O-ringSilicone 85Terminal/ ContactCopper, silver plated/ contact锛歝opper , gold plated 91Hex NutNickel plated brass Returned plastic should not exceed 20%. 6.Delivery,shipping and service 7.FAQ Q锛歐hat is your main market? A:Europe, The North America, South America, Australia, The middle east, and etc. Q: What鈥檚 your after-sale service? A: Our quality warranty period is one year. Any quality problem will be solved to customer satisfactions. Q锛欼s the sample available? A:Yes, we are providing free of samples are available for you to check the quality once confirmed after 1~2day. Push Button Switch suppliers website:http://www.switechchina.com/push-button-switch/
    WWW.SWITECHCHINA.COM
    Push Button Switch Suppliers Manufacturers in China - SWITECH
    Established in 1979, SWITECH is one of the most professional push button switch manufacturers and suppliers in China. Please feel free to buy high quality push button switch made in China here from our factory. For price consultation, contact us.
    0 Comments 0 Shares
  • "Hellmann Smart QR" enables cost-efficient and user-friendly visibility along the entire supply chain for sensitive cargo such as perishable goods or pharmaceuticals.

    #Hellmann #HellmannSmartQR #transparency #globalsupplychains #QRdatatracker #temperature #humidity #visibility #sensitivecargo #perishablegoods #pharmaceuticals #cloudbasedplatforms #supplychain #digitaltrackingplatforms #datatrackers #activetrackingsystems #passivetrackers #internationallogisticsnetwork #transportchain
    "Hellmann Smart QR" enables cost-efficient and user-friendly visibility along the entire supply chain for sensitive cargo such as perishable goods or pharmaceuticals. #Hellmann #HellmannSmartQR #transparency #globalsupplychains #QRdatatracker #temperature #humidity #visibility #sensitivecargo #perishablegoods #pharmaceuticals #cloudbasedplatforms #supplychain #digitaltrackingplatforms #datatrackers #activetrackingsystems #passivetrackers #internationallogisticsnetwork #transportchain
    WWW.STATTIMES.COM
    'Hellmann Smart QR' digitizes passive data tracking
    "Hellmann Smart QR" enables cost-efficient and user-friendly visibility along the entire supply chain for sensitive cargo such as perishable goods or pharmaceuticals.
    0 Comments 0 Shares
More Results
Sponsored
Sponsored
Sponsored
Sponsored


Don't forget, ads time: PentaVerge | AQU | Debwan | ICICTE | Nasseej | ESol | OUST | CorpSNet | PoemsBook | TopDeals | TheReaderView